Temporary

9.5mm Inductive Loops - Model CG9.5MM

• Highly abrasion-resistant Polyurethane alloy cover
• High tensile strength braided synthetic yarn reinforcement
• Good flexibility over a wide temperature range
• Minimum impact pressure of 3000 psi (20,680 kPa)
• Nylon alloy core tube
• Superior resistance to oil, gasoline, salt, moisture and impact
• Max. o.d. of 3/8” (9.5 millimeter)

• High tensile strength / tenoerature self-locking Polyethylene “T” connector to connect the loop head to the protected lead-in (No wire splices)

• Loop wire is 20 gauge silver coated with Teflon jacket, stranded, single conductor wire.
• Number of turns to be determined by engineer or factory and will depend on loop size, loop depth, presence of reinforcing steel and other special factors
• Lead-in wires shall be machine twisted at a minimum of 8 twists per foot (30 cm).
• One continuous wire shall be used to manufacture the loop and lead-in, no splices shall be allowed.
• Extra wire shall be incorporated throughout the conduit by means of the “Z” method to compensate for pavement movement.

• Loop and lead shall be filled with a flexible rubber self sealing emulsion to prevent moisture entering the conduit and prevent false calls from movement of the wire within the conduit.
• Preformed loops shall be commercially manufactured.

   

• Quality control of the end product shall be performed and passed as specified in the Preformed Inductive Loop (P-ILD) Handbook V.2.4 and be submitted to the end user.
• Loops shall be individually marked as to the direction of the wire turns.
• Preformed loops shall have a 15 year minimum manufacturer's guarantee.